Showing posts with label auction project. Show all posts
Showing posts with label auction project. Show all posts

Tuesday, April 28, 2009

The Bag of Frustration





Thank goodness for the fantastic support of friends and family.  Otherwise, this bag was leading me down a path towards a existential crisis regarding my creativity!  


I wanted to contribute a bag to my dad's Lions Club's annual fund raising auction.  I had my eye on a felted tote bag in a fabulous knitting book I have called "Alterknits" by Leigh Radford.  I knew it would be a great project for using up a bunch of wool odds and ends.  And there was a variation in the book that has handles made out of clear vinyl tubing.  I really liked that handle idea.  Here is a picture of the bag from the book's website, this being the version with felted handles:




 I decided to make the version that is supposed to be about 20"x20" after felting.


So I followed the instructions religiously, following directions for needle size and the number of stitches to cast on.  I did what is a pretty crazy combination of colors for me, but I liked the tropical feel to the mix.  I knit and knit and knit.  Luckily it was mindless knitting on circular needles (all knit stitch), good for movies, car trips, etc.  When I finally reached 35" long as directed, I did a 3-needle bind-off for the bottom seam and here it is:





A long skinny sack.  I was suspcious of how long and skinny it was at this point (like the perfect size for a long, skinny skirt), but I know that knitting shrinks more vertically than horizontally when it is felted...so I wasn't worried.  I finished the bottom as directed so it would be flat like the bottom of a paper grocery bag and popped it into the washing machine to felt.


I was expecting a square bag, so I was a bit shocked to see a most definitely rectangular-shaped felted bag come out of the machine -  




I don't think this picture even does justice to how long and skinny the bag was at this point.  It went from about 34" to 20" long, but I didn't measure the beginning width for a comparison there, darn it!  It ended up being about 13" wide.  Darn!  Not the big tote shape that I had in mind.


I was soooo frustrated with the long skinny shape.  I was ready to cut several inches off the top or the bottom.  But I took it for "show and tell" to my knitting buddies, and a couple of them came up with the idea of simply turning down a cuff - 




The fact that there would be two layers of "fabric" for the handle to attach through seemed like a great bonus.  So that's what I did.  Thanks a ton, my wise and clever friends!!


You probably have no idea how hard it is to find clear vinyl tubing with no permanent lettering on it, and I wouldn't blame you for not knowing.  Take my word for it.  Our local pet store had enough of the right size tubing for one handle.  This tubing had very little writing, but it had a slightly bluish tint which I didn't really like.  I found beautiful crystal clear tubing at McLendon's Hardware, and I spent an afternoon trying to figure out a clever way to remove the lettering on it.  No solvent that we have worked.  I tried different abrasive attachments with the Dremel, and that left long frosted patches instead of print.  So did a little buffing attachment I have for the Dremel.  I thought that maybe if I carefully heated the frosted area up with a little tiny butane torch it might shine it back up, but that made the tubing have a slightly opaque cast.  Grrr.  Finally I tried a pet store further afield and found more of the bluish tubing and decided I'd have to go with that and the little bit of writing it had on it.  Amazingly enough, I discovered in the end that I could rub the lettering off of the pet store stuff with my fingernail.  Crazy. 


The instructions in the "Alterknits" book say to attach the tubing by hand-sewing it onto the bag through a couple of holes, with a button sewn onto the outside of the tubing in the process.  This was not bullet-proof enough for me.  I came upon something to use that is now my new favorite fastener - copper rivets!  




We had some of these in the hardware that we brought home after cleaning out my step-grandpa's basement workshop, but I had no idea what they were for, until now.  Thanks to some awesome help at McLendon's, I realized that these rivets would do the trick to fasten my handles to my bag in a very solid way.  Luckily the rivets come in different lengths, because I had some serious thickness to fasten together.  


Here's what the attachment looks like on the outside -   


 

And here it is on the inside - 




That copper washer and the head of the rivet both are about 1/2" in diameter.  I added larger washers under the copper ones to spread out the pressure and/or keep the little copper washer from pulling through or something.  The coolest thing was that I learned that you use the round end of a ball-peen hammer to flatten out the end of the rivet!  I never knew what you would "traditionally" use that round end of the ball-peen for.  


Finally, I cut and finished a piece of masonite to put in the bottom (on the inside of the bag) to give it a good, solid base.  Here that is, on the outside, obviously - 




Done, and in time for the auction.  Even if it wasn't quite how I had envisioned.  I actually enjoyed the problem solving challenges of this project, except for the fact that it was a bit too down to the wire.

The real frustration/self-questioning came when there were three minutes left in the section of the silent auction that the bag was in.  There was only one bid on the bag, and that was for the starting bid of $15!!  I was flabergasted, after putting all that work into it.  So Eric encouraged me to bid on it and just get it back, which I did after one other bid by that first bidder.  That was a crazy blow to my creative ego.  But luckily my wise women knitting council came through again this Monday and pumped me back up with their outrage and encouragement.  At their suggestion I will either keep the bag for myself, put it up for sale in my (still empty) etsy shop, or donate it to the junior high auction next spring.  

On the other hand, my fused-glass windchime in the auction went for the "buy it now" price of $45, which I think was actually much too low.  (I am terrible at pricing my own work - after it was too late to change the value for these auction donations an awesome woman who works at the glass supply shop suggested a value of $60-$75 for it...)  The time spent on the windchime was a fraction of that spent on the felted bag!  I don't think you can ever get fairly compensated for your labor/time spent on a decent-sized knitting project....








Thursday, April 23, 2009

Spring Wind Chime Redux





This is obviously very similar to the wind chime that I featured in my last post, but with one little change that I loved.  Instead of grabbing one of the heart pendants that I had lying around the studio to hang at the bottom, I made a little flower pendant in clear glass to match the main body of the piece.  The little flower is quite cute, and it is another potential jewelry item to market.  The fact that it matches the main part of the piece in both image and clear-ness was a detail I was very happy that I tried.  Here is a goofy shot, but it makes it obvious which parts are all clear glass -




This project was a donation to the fund raising auction for The Attic Learning Community.  


And speaking of goofy pictures, here is last minute one of an idea that popped into my head for still another pendant idea to work on....




I'll be working on the size and/or proportions of the recycling symbol, but I think that would be a good necklace pendant AND an especially a fun thing to potentially hang on my recycled-plastic-bag bags as a cool little token to emphasize that they are made of recycled materials.

Friday, March 27, 2009

Working on Glass Wind Chimes




I was asked recently if I would be willing to donate items to a couple of fund raising auctions.  I am a sucker for making stuff for a good cause.  Plus, having a concrete reason to create something (and having a deadline!) gets me working in the studio.  For each auction I decided to make a fused-glass wind chime and a knitted bag of some sort.  I'm posting pictures of my work so far on these two wind chimes to show-and-tell how I make them...



This is my beloved kiln, by the way.  I bought it from the man who owned the jewelry studio where I worked before Nick was born.  I spent HOURS making beads in it for the jewelry studio.  I just realized this week that it might be 30 years old, but I'll have to check with my buddy Carolyn, who was the studio manager and worked there way before me.  Nowadays you can buy kilns to use to fuse glass that are totally programmable.  Luckily I'm an old school kind of gal.  


For these two pieces I decided to make flower shapes out of copper wire and fuse them between clear glass for the body of the pieces.  For the hanging/chiming parts I planned on scavenging spring-ish colors from the miscellaneous glass that I have.  


My layout plan:




This is a shelf full of finished hanging parts for two wind chimes.  I fused a strip of clear glass on top of the strips of colored glass and included copper-wire rings at the top for hanging.  This picture shows you the size limitation that I have to work with in the kiln... the kiln shelf that I use is about 8"x9" - 



I divided up the parts  for the two pieces - 




While the hanging parts were in the kiln I figured out the layout of the flowers and the ring placement for the main part...

 


Ready to go in the kiln...





And the body of the piece after fusing in the kiln -  



I had to take a picture when I saw the late afternoon sun shining on it.  This is a good shot of the kiln paper that I use to keep the glass from sticking to the shelf.  The paper basically turns to powder after being in the kiln.  Nasty-for-your-lungs powder.  Maybe someday I'll try kiln wash on the shelf instead, but for now I'm careful not to breath this stuff.






This final shot shows the clear glass better than the first picture.  I decided that I wanted to hang an additional something from the bottom of one of the hanging parts , so I used a heart pendant that I already had.  For the second wind chime I will fuse a little copper wire flower in clear glass to use instead....